How to make a paper cap with your own hands. How to make a paper hat with your own hands How to make a cap at home

On the eve of various holidays and carnivals or children's matinees, the question of creating costumes arises very acutely. You can purchase them ready-made, or rent them at one of the specialized points. However, it will be much more interesting, and at the same time more exciting, and even more enjoyable, to dress a child in a self-made costume. Even when you are not particularly good at sewing, it is quite possible to select appropriate clothes from your wardrobe to make accessories out of them. For example, it is very easy and simple to make a cap out of paper with your own hands.

To do this, you will need basic tools and materials available in every home, as well as just a little free time.

Advice

On the Internet you can find diagrams on the basis of which it is possible in the future to make, for example, a funny Pinocchio cap out of paper, or a wizard’s headdress, decorating it with drawings or pasting it with colored paper or foil.

Step-by-step instructions for creating a cap

First, take the paper and bend the sheet diagonally into a square shape. Bend its corner inward along a line that separates approximately one third of the resulting triangle. After this, you need to bend the second corner in the same way. Next, bend the resulting corners and unfold your craft. That's it, the cap is ready, all that remains is to decorate it at your discretion.

Paper chef's hat

Such a cap will become a decoration, one might even say, the “highlight” of a carnival costume, or it will also be used at home for its intended purpose - putting it on the heads of little kitchen helpers and cooks. To do this, you will need white parchment paper, white cardboard, as well as narrow adhesive tape and scissors with a ruler.

To determine the size of the base, you should measure the volume of the head of the person for whom it is actually intended. Based on the data obtained, we make a base out of cardboard, leaving 1-1.5 centimeters for gluing. You will need to take twice as much parchment paper as the length of the base, because it will need to be collected later. You need to make folds at the very base of the parchment paper and glue it with tape to the base so that it occupies half of it. After this, folds should be formed at the other end of the paper, but there is no need to glue them yet. The base needs to be glued so that a ring comes out. After this, carefully, without deforming or bending the folds, place the free end of the paper into the cardboard base and glue it. The gaps remaining on the sides are also carefully folded inward, and then glued to the base. Gently straighten the parchment paper, thus giving the cap a beautiful, rounded shape. After this, the chef's hat is completely ready.

No less relevant is a paper party hat. For example, a fun celebration of someone's birthday or Christmas would not be complete without carnival costumes. You can buy caps that are ready for use - they are sold in supermarkets or in specialty stores. Moreover, the assortment includes models decorated in a variety of ways and in different styles. This is especially true when organizing thematic events. Alternatively, you can do this thing yourself. For example, so that the caps are the same for everyone, or vice versa, preferring a variety of options - decorating each cap individually. Shiny colored ribbons and paper, as well as foil, can serve as decorations. Children will love their favorite cartoon characters depicted on the caps. The cap is cut out of cardboard according to a pattern previously applied to it. This is such a peculiar pattern. It can be found on the Internet; constructively there is nothing complicated here. After this, the cap is decorated. If necessary, an elastic band is attached to its base, with which it will be held on the head.

Conclusion:

A paper cap may be needed in a wide variety of situations. For a carnival or for fun, it will be a great addition to the overall look. Creating it with your own hands is not so difficult; it requires ordinary stationery materials and a little patience.

An invariable attribute of the New Year's holiday is the cone cap. If you want and don’t know how to make a cap with your own hands from paper, you’ve come to the right place. You can make a cap from paper, cardboard or whatman paper. This method of making a cap allows you to make a cap for both the smallest child and an adult.

How to make a cap from whatman paper with your own hands?

Now we will tell you everything step by step. It comes out best from whatman paper. To do this, you will need a piece of Whatman paper in A1 format. Its size is 60cm by 84cm. How to make a cone for a Christmas tree from whatman paper, step-by-step instructions.

1. We divide the wide side of the Whatman paper, where it is 84 centimeters, in half and put a pencil mark on top. We place a mark at a distance of 42 cm from the edge.

2 . You need to tie a pencil or pen to a thin rope or strong thread 1 meter long.

3. Pressing the rope with your finger at the mark, you need to tighten it, and place the pencil right next to the opposite edge of the Whatman paper.

4. Using the rope as a compass, draw a semicircle on whatman paper.

5. Using scissors, cut out this semicircle along the line drawn in pencil.

6 . On one of the sides, you need to bend whatman paper along a straight line that connects the marking point at the top and the end of the circle at the side.

7 . Curled Whatman paper can be cut along the line, but it is better to leave it. This will help strengthen the walls of the cap. Then roll the workpiece into a cone, placing the curved end on top. This point is very important in making a cap. Right now you can adjust the size of the cap for a specific person - by twisting the cone more or less.

8 . Having fixed the cap with a paper clip, you need to apply glue along the edge of the curved end of the Whatman paper and glue it. For better gluing, you can temporarily fix the surfaces to be glued with pieces of tape.

9. The Christmas tree cap is ready. Now you can decorate it with colored paper, cover it with fabric or paint it. At the bottom, you can glue ties made from laces or elastic bands with pieces of whatman paper so that the cap rests securely on your head.

Video. How to make a cone for a Christmas tree from whatman paper?

New Year attributes are used to create a special mood. Children and adults love to dress up for the holiday.

If you want to make a costume with your own hands, a master class on how to sew a New Year's style hat to match any chosen outfit will come in handy.

Tools for a New Year's hat

For any handicraft you will need tools and raw materials. If sewing is new, it is better to use simple patterns and diagrams to create an unusual cap.

Tools for creating a festive headdress:

• a piece of colored cardboard or fabric - choose the material that is at hand so as not to spend money on purchasing additional elements;
• scissors;
• glue or threads - the fastener depends on the chosen base;
• sequins, buttons, pieces of fur and ribbons - any decorative elements.

The New Year's cap is created from a paper or soft base. The cardboard head accessory is a disposable accessory that can be thrown away immediately after the holiday.

It will not be possible to store such a cap.

A soft product made from fabric or felt can be stored for several years, but its production requires more time and additional materials. You can sew a fabric cap yourself using a master class: ready-made measurements and patterns will help you sew a proportional, high-quality product.

Cardboard cap

This accessory is suitable for a New Year's party. To do this, a semicircle is cut out. To calculate the circumference, measure the circumference using a ruler - this will be the circumference.

The height of the cap is chosen arbitrarily, but not more than 50 cm. After this, the cardboard of the selected color is glued and decorated.

For decoration, New Year's “rain”, beads, sparkles or ribbons are used.

A bow is glued to the top point of the cap or a pompom is sewn on.

Basic pattern

For a soft New Year's cap, you need a pattern or template according to which even a beginner can make a New Year's hat. The dimensions of the template depend on the circumference of the head. For a child, the pattern needs to be reduced so that the hat does not fall off the head.

To create a pattern, plain paper is used. A triangle is drawn on it. Conventionally, three sides are signed: the lower left corner is designated as A, the opposite lower right corner is signed as B, and the top of the figure is designated as C.

In complex patterns, the top is divided into two parts, but you can do without this. The letters will help you understand which edges of the cut fabric need to be sewn together.

The length of each part for an adult is average. The bottom is chosen to be at least 55-60 cm: the average head circumference of an adult, if necessary, is adjusted using decorative elements that are sewn on at the end. The height is chosen to be no more than 40 cm. The pattern is cut out, after which it can be used to create two identical parts.

Fabric requirement

The cut parts need to be fastened. To do this you will need simple threads and a needle. It is not necessary to use a sewing machine for such a simple job. To sew different new hats, one pattern is used, but different materials.

Will you try to make the same cap?

YesNo

It is better to choose a thick fabric with a minimum amount of stretchy materials for a holiday accessory - when worn, the hat will not stretch, and its ends will not gather into unsightly folds. If a product is sewn from felt, the allowance is minimal - the material is dense and does not need to shrink.

There is no need for a pompom pattern or a piece of fox or hare fur. They are cut to the shape of the part of the base to which they will be sewn. Parts are cut out with a seam allowance - you cannot cut the fabric end-to-end according to the pattern, or the pattern itself initially takes the seam into account. If you take into account the basic and simple rules, a beginner will get a good New Year's hat.

Sewing process

First, two main parts are sewn on. The side seams are sewn together, after which the product needs to be ironed. Depending on the material used, it is necessary to use an overlocker or additionally hem the seams so that they do not stick out.

After this, the top is connected, but its corner is bent inside the cap. This will create the correct base for the pompom. We sew the pompom itself with regular thread, but it fixes it well to the base of the product.

The finishing touch for the New Year's hat is the bottom made of fur. To do this, pieces of fur are sheathed in an even strip: two identical parts are connected on the front side and carefully sewn together. The product is turned inside out. The bottom of the base is hemmed - the finished edge can be decorated with a simple ribbon or a sewn fur roll.

Additional decorations for the cap are not needed. The felt product is decorated with pieces of fabric, buttons or snowflakes. Any finishing material is suitable for decorating a homemade hat for the New Year.

Bottom line

New Year's decorations at home and preparing holiday costumes is an exciting process for all family members.

A hand-sewn cap will become a unique attribute that you can be proud of.

Bright, beautiful caps will complement any children's party, because children like them so much. This accessory may also be appropriate for celebrations with adult guests. A regular cap will be perfect for birthdays, bachelorette parties and other joyful celebrations. Such a headdress can be purchased in a store, or you can save money and make it yourself in a matter of seconds. So, how to make a paper hat and create a festive atmosphere?

The easiest and fastest option is a cap based on a template

If you don’t have the time or desire to bother making a cap, then the most primitive method will suit you. Take a ready-made template with a picture. If necessary, adjust to size. Take thick paper and print it on a color printer. Cut and fold according to instructions. Usually it is intuitive and without text. For reliability, you can secure it with glue or a stapler. We thread the string - and the cap is ready!

How to make a paper cap according to the diagram

The method of folding the cap is the same as in the previous version. The main difference between the scheme is that it is not colored, but white. Here there is room for imagination. You can design the cap the way you like in any graphic editor, and then assemble it. Or print it out first, and then decorate it with paints, pencils, felt-tip pens and decorate with decorative elements.

This option can be successfully used at children's parties. Just invite the kids to decorate and assemble their own caps. Usually children love to draw and make things with their own hands, so they will readily agree. This way you will fill up the holiday time and keep the kids engaged. Just don’t forget to help and show how to make a paper cap.

Step-by-step master class: making a cap from a whole sheet of cardboard or paper

No less simple and fast way. This cap is made without any templates or patterns:

1. Take regular colored cardboard or thick paper.
2. Roll into a cone to the desired size, cutting off any excess corners. As a result, the cap should stand flat on the table.
3. If your headpiece ends up too tall, use scissors to trim it. Usually the caps are made small so that they look funny on the head.
4. Mark the joints with a pencil.
5. Fasten at the marked points using a stapler, glue or paper clips.
6. How to make a cap out of paper so that it stays on your head? Secure string, satin ribbons or an elastic band to the sides of your headdress using tape or pieces of cardboard.
7. The cap is ready, now you can decorate it to your taste.

Making a cap using the origami technique

Typically, square sheets of paper are used for origami. If we haven’t found any, it’s okay, we’ll do it ourselves. Take a regular A4 sheet and bend one corner to form a triangle. Cut off the protruding parts with scissors.

We don’t unfold the triangle, we continue to work with it. Visually divide the sheet into three equal sections. Fold the sides towards the center. Bend the protruding corners up. So the flat birthday cap is ready. How to make it voluminous? Simply open the cap with your hand, as if flattening the corners towards the center.

Ideas for decorating a paper cap

The most creative and exciting process is decorating the cap. Decorate it the way you like. And a little advice on what materials to use for this will help you with this.

You can make it unusual and original for your birthday by covering it with fabric or foil. Decorate the top with any material: sequins, rhinestones, floral butterflies, small toys, brooches, beads, photographs, etc.

If you have good artistic abilities, paint the cap with paints. Draw funny images, make a multi-colored gradient transition. The caps can be signed with the names of the guests or funny nicknames.

Decorate the top with a star or donut made of foil or string. To trim the edges, use ribbons, tinsel, and frilled corrugated paper or satin ribbon.

Now you know how to make a paper cap that won’t take up much of your time. This simple accessory will create a joyful and slightly carefree atmosphere at any occasion, be it a birthday or a party. And even adults will be able to feel like children again.

Not only will your children love this fun New Year's hat, but it's also perfect for an adult holiday party. The holiday atmosphere is created with the help of details: the smell of tangerines, a chic table, a Christmas tree and... funny caps. We present to your attention a small master class on how to make this festive accessory.

To work you will need:

• colored cardboard;
• scissors;
• tinsel, sparkles;
• threads;
• glue.

Surely everyone has made something similar at least once on their own. Therefore, you should not have any difficulties. This craft is so simple that even children can do it without any help. And to make the process as fast and fun as possible, we offer you a master class.

• Cut out the template on cardboard of the desired color. Roll into a cone and insert the protruding parts into the slots. The cap is almost ready! To prevent it from opening at the most inopportune moment, carefully glue it along the edges.

• Then everything depends only on your imagination. Around the base, attach tinsel, pretty braid, or homemade paper trim for the edge using glue.

• You can also attach a small piece of tinsel to the cap, making a so-called tassel.
• Decorate the cap with sparkles, inscriptions or shiny rhinestones. You can also decorate the letters beautifully with sparkles.

• You can make them in the same style or completely different. Trust your imagination.
• At the base of the product, fasten two threads from the inside; for greater reliability, carefully thread them through the cardboard with a needle. This way they won’t come off and will press the cap tightly to your head.

If you have enough time to prepare, experiment. Tinsel pompoms can be replaced with fabric ones or you can create something new and unique. Believe me, even such a simple decorative element as a New Year's cap can make the holiday sparkle with colors completely unexpected for you and your guests.