Knitted kitty hat. Knitting a hat for a girl: step by step mk. Hello Kitty This master class with a diagram, photo and description will tell you how to crochet a Kitty hat for girls

Knit a hat for your baby in the shape of his favorite cartoon character. Based on this description, you can knit a bear, bunny, tiger, etc. hat.

Size of knitted hat: OG 48 cm.
Knitted hat height: 13 cm.

interesting selection for the site!!!
Children's hats, without adult models

You will need: 60 grams of cotton thread and a hook of a suitable size.

How to crochet a baby hat.

Description of work

in the “amigurumi ring” (see), cast on 6 single crochets, tighten the ring and knit 33 rows with single crochets according to the table. In the table, the first column indicates the number of the row, the second column indicates how many loops to add/subtract (“+” means an increase, “-” means a decrease, “+” or “-” zero means that we knit the same number of loops as in the previous row - no extras). The third column indicates the number of loops. So, in the second row, knit 12 single crochets (+6 means adding 6 loops, relative to the first row).

In the third row - add 6 single crochets - resp. we knit 18 single crochets, etc.

When the hat is ready, tie the ears and ties. Make tassels at the end of the ties. Decorate the hat with a bow, sew on the eyes and nose.

The softness of angora. How amazing! But it is very important for kids that their clothes are soft and pleasant. I suggest knitting a warm baby hat, Kitty Cap, with small ears reminiscent of a kitten.

Hat with ears Kitty Cap Step by step instructions

We will need:

Anny Blatt angora yarn. It is quite expensive, you can take another angora thread with the appropriate parameters (106m/25g).

Knitting needles No. 3.5.

Description for 2 sizes:

;
from 3 to 9 months (second digit).

We cast on the knitting needles 51/65p, knit 11p. (all loops are front).
We move to the front stitch (on the front side - knit, on the wrong side - purl), evenly adding 20 stitches. Total: 71 / 85p. Knit 15 rubles.

Let's start making increments for the hat's ears:

1st row: 25/29 knits, increase (knit two from one stitch), another increase, 20/22 knits, 2 increases, 26/30 knits.
2 and all even: purl.
3rd row: 26/30 knits, 2 increases, 22/24 knits, 2 increases, 27/31 knits.
5 rubles; 27/31 persons, 2 increases, 24/26 persons, 2 increases, 28/32 persons.

We continue to add in the same way in each odd row of the cap.

For sizes from 0 to 3 months we knit a hat for 18 rubles.
For sizes from 3 to 9 months, knit another 2p: 19 and 20p.
Total on knitting needles: 107/125p.

Attention! The fabric of the Kitty Cap must be divided:

For newborns - 23p side, 20eye, 20center, 20eye, 24side.
For size 3 - 9 months - 27 side, 24 eye, 23 center, 2 eye, 27 side.

The next stage of knitting a baby hat:

1. Remove the loops of 2 ears to the auxiliary. knitting needle or thread and leave. For now they will not participate in the work.

2. We knit only the central part - 6p. knit.stitch.

3. We begin to connect the center. and sides of the cap: We knit the central part like this:
Edge, 2 stitches together, knit 14/17, 2 stitches together, and knit the last edge stitch with the first loop of the side part at the same time (the eyelet loops remain separate for now).

Turn it over.

Purl rows - purl loops, knit the last stitch from 1 side.

Let's turn.

Continue knitting 4 and 5 stitches “back and forth”, each time connecting 1 stitch of the middle with 1 stitch of the side of the cap.
At 6 p.m. you need to make a decrease (wrong side): knit the second and third loops at the beginning and end of the row together,
continuing to connect the center with the side part.

We repeat from 1 to 5 p., doing in 6 p. decrease until 11/13 stitches remain on the needles.

How to crochet a Kitty Cap?

We cast on 45/55 stitches along the edge of the cap plus 15/18 chain stitches to knit a fastener under the child’s chin.
Knit 4p. garter stitch, then you need to form a hole for the button:
K3, 2 together, yarn over, rest st. facial.
Then another 4 rubles. with a handkerchief stitch and close the loops loosely, without tightening.

How to knit ears on a Kitty hat?
And they are already connected. You need to fold them in half, then sew 2 stitches of each half at the same time.
Sew on the button so that the Kitty Cap fluffy hat is comfortable for the baby.

Video master class on knitting hats:

The Hello Kitty character is very popular, it was invented by Japanese animators, but now it is already a real brand: such a design can be found on children's dishes, things, stationery, and if you have already mastered crochet hats for children, then be sure to take this option for decorating it. Such a gift will surely make the little princess happy and will warm her ears on the first cold autumn days. This model can be mastered even by a beginner who has never knitted a product before, but has only mastered the variations of various loops.

Crochet hats for children

Materials we need to complete knitting hats for children: white yarn, you can leave its thickness at your discretion; it is advisable to take threads with a natural composition for your child. In our case, this is Vita Brilliant yarn - 55% acrylic, 45% wool. There are approximately 380 meters of yarn in 100 g, so for this product one skein will be enough, and if there is a little yarn left, you can find out, it will tell you all the secrets.

We knitted the hat in two threads, for this we need to first divide the skein into 2 parts, so unwind half. It will be more difficult to knit from one skein; to do this, take one thread from the outside and pull the other from the end.

You will need two types of knitting needles: circular and straight. Choose the number of tools in accordance with the thickness of the yarn you have chosen, the advice of a sales consultant will help you with this. In our case, knitting needles No. 3. You also need a knitting needle, which you will use to sew the open loops of the cap.

Before you start knitting, you need to measure the circumference of the child’s head, in our case it is 50 cm. The hat should be made a little tighter, since the knitted fabric will stretch a little, about 2 cm.

When you cast on stitches for the first row, use straight needles. You need to collect 110 of them.

This hat will not have seams, so the loops need to be transferred to circular knitting needles, then you need to knit an elastic band - the first row. It is knitted in a two by two pattern, so two purls and two knits will alternate.

Knitting pattern for a baby hat is clear, now it needs to be connected into a circle, while the last loop of the row needs to be moved from the right to the left knitting needle, now it will be next to the first loop. They need to be knitted together, thus completing the circle.

So you need to continue weaving in a circle with a 2 by 2 elastic band so that it becomes the desired height. In our version, it will be four centimeters (that’s 14 rows).

Now the elastic band is ready, but knitting continues in the circle, using only knit stitches, that is, you get knit stitch. You need to knit 54 rows of satin stitch, so you will get a height from the elastic of fifteen centimeters.

Now the hat is almost ready, but we still need to sew the open loops. To do this, you need to use a knitted seam - “loop to loop”, because it is almost invisible, and it also helps maintain the elasticity of the knitted fabric, because it is very stretchable.

Be careful not to let the stitches unravel as you remove them from the needles. It will be more convenient to sew them if you steam them first, but the line of the knitting needles may be damaged as a result, since it is affected by high temperatures, so for this procedure the loops can be transferred to straight knitting needles, you will get 55 for each.

When you steam the hat, hold the iron suspended and should not touch the knitted fabric. When processing the main thread, one end should be left approximately five times longer than the length of the seam.

Now you need to take a knitting needle and point the ends of two knitting needles to the right. Sew the loops from right to left, removing them from the knitting needles gradually.

Because the knitting openwork hats for children occurs in a circular manner, the product does not have a clear boundary between the front and back parts. When you move it onto straight knitting needles, the edge will be marked, you will have front and back walls.

Knitting hats for children

Now let’s sew: moving away from you, insert the needle into the first loop of the front row; your needle should enter from the front side and come out from the wrong side. Stretch the thread, bring the needle towards you, but now into the first loop of the back row, then move it away from you into the next one of the same row.

Pull the thread, but do not tighten it too much. You can watch this process in a master class with photographs. It turns out that the needle must pass through each loop twice. It is important to pull the thread evenly, not to pull it tightly, then the seam will be invisible.

You now have a hat ready, and you need to decorate it in the Hello Kitty style. First, we separate the corners with large stitches, so we get “ears”. We will embroider Kitty's face with beads. For the eyes and antennae we will take black beads, and for the nose - yellow. It is better to give preference to large beads, because small ones will most likely “drown” in the knitting.

For embroidery you need to take monofilament, transparent it will be completely invisible, but you can also take thin fishing line. You need to take a thin needle so that the beads can easily pass through it.

For the bow, you need to take not only the pink ribbon that you have already made from, but also auxiliary materials - pins and scissors.

Be sure to master and tell you how you can use leftover yarn to knit motifs.

Thinner threads, preferably “iris”, should be taken if you are mastering knitting for children - summer hats will be able to cover the baby's head from the scorching rays of the sun.

This master class with a diagram, photo and description will tell you how to crochet a Kitty hat for girls.

Everyone can choose whatever hats are in stores to suit their taste. However, if mom has imagination and skillful hands, she won’t have to choose anything; mom can easily turn even the most unimaginable ideas into reality. Today I bring to your attention a hat of Kitty the kitten from the cartoon of the same name, the hat is crocheted. Thanks to the use of plush thread, it looks very gentle and attracts the attention of others.
To crochet a hat for girls we will need:

White Softy Alize yarn (100% micropolyester) - 1 skein;
Black and yellow yarn for decoration;
A piece of red felt;
Hook.

To calculate the size of the cap, you can use special formulas. To determine the diameter of the bottom of the cap, divide the child’s head circumference by Pi and subtract 1.5 cm from this value. For a child a little over a year old with a head circumference of 47 cm, it turns out: 47/3.14 - 1.5 = 13.5 cm So, We start knitting with five air loops closed in a ring. In the first row we knit 10 double crochets into a ring. Next we make additions, that is, we knit 2 double crochets into one loop. In the second row we make such additions in every second loop, in the third row - in every third loop, in the fourth row - in every fourth loop, etc. Thus, we get this round bottom of the hat with a diameter of 13-14 cm.
Next, we knit the cap without any additions to the depth we need. The depth of my cap turned out to be 12 cm.
We measure the distance between the ears. To do this, it is better to try the hat on the child so as not to make a mistake and the ears are in the right place. I got this distance to be 18 cm. Let's start knitting the ears. To do this, we knit 15 double crochets from your mark. Turning the product over, we knit rounded ears, decreasing one column at a time on each side. The height of the ears is 6 cm, but this is also individual, do not forget to try the hat on your baby.
Without breaking the thread at the end of knitting the ears, we immediately knit a chain of 50 air loops. We got the ties for the hat.
The hat is ready. The distance between the ears at the back was 15 cm. At this distance, I knitted another row with double crochets so that the back of the hat would better cover the baby’s neck.
Now let's start knitting cat ears. To do this, it is also best to put a hat on the child and mark with a pin or thread the place where they should be located. We knit 12 double crochets along the intended line and, turning the product over, knit triangular ears, reducing the number of stitches in each row.
Let's start designing the kitten's face. Using black yarn, we knit a series of double crochets into an amigurumi ring to create eyes. We knit the nose with yellow yarn, it should be slightly oval. To do this, we knit a row of double crochets not into a ring, but into a chain of 3 - 4 chain stitches.
Sew the eyes and nose to the hat. We embroider antennae with black thread.
We form a bow from red felt and sew it on the side, next to the ear.
We got such a wonderful hat. Your baby will be happy, and the snow-white kitten will not go unnoticed during a walk.

Comments

This master class will teach you how to crochet a hat for newborns - a bear hat. A detailed master class with photos will tell you how to crochet a kit for a girl with your own hands. A master class with a detailed description and photo will show you how to crochet a toy - the symbol of the year - a monkey for a Christmas tree