Crocheted Santa Claus. Crochet Santa Claus doll. Master class from Arina! Knitted Santa Claus and Snow Maiden with MK knitting needles

Kaftan

At the first stage of knitting Santa Claus's caftan, we cast 6 double stitches into the amigurumi ring and close them into a ring, connecting them together with a connecting loop.


We continue further work according to the description presented below:
1st row: row x 6 times = 12 sts
2nd row: (st-k b/n, pr-ka) x 6 times = 18 sts
3rd row: (2 treble crochet, crochet) x 6 times = 24 sts
4th row: (3 treble crochet, crochet) x 6 times = 30 sts
Row 5: (4 treble crochet, crochet) x 6 times = 36 sts
6th row: 36 stitches b/n
When we have knitted all 6 rows we should get a round figure like this.


In the next 7th row we will use fancy yarn YarnArt Happy in white to knit the edge of the caftan. Therefore, we change the red thread to a white fancy one and knit a single stitch behind the back wall in each loop of the bottom row.
8th row: 36 stitches b/n


Again we change the yarn from white to main red and continue knitting the caftan according to the description:
Rows 9-16: knit 36 ​​single stitches
Row 17: (4 sts, dec) x 6 times = 30 sts
Rows 18-22: 30 sts.
Row 23: (3 stitches, dec) x 6 times = 24 sts
Rows 24-27: 24 single stitches
Row 28: (2 stitches, dec) x 6 times = 18 sts


The final stage in knitting a caftan is knitting a collar; for this we change the red thread to white fancy yarn and knit the next two rows with non-woven stitches.


The caftan is ready, you can fill it with holofiber.


For the caftan, we will knit a lapel from fancy yarn, for this we knit 24 chain stitches, we now need to unroll the knitting and knit one single stitch into each stitch of the bottom row until the last stitch.

Head.

We will knit the head of Santa Claus with white YarnArt Jeans yarn and, as usual, we start with an amigurumi ring and 6 stitches cast into it. Below is the description:

Hands.

We start knitting with red yarn.
1st row: 6 dc in amigurumi ring
2nd row: row x 6 times = 12 sts
3-5 row: 12 stitches b/n


In the 6th row, we change the color of the main red yarn to white fancy and knit this row with st-mi b/n, after which we continue knitting with red yarn.


7-16 row: 12 stitches b/n
Row 17: (stc b/n, dec) x 3 times = 9 p
The hand is almost ready - fill it with holofiber and close the loops as described.
18-19 row: 9 stitches b/n
Row 20: (stc b/n, dec) x 3 times = 6 sts
Row 21: dec x 3 times = 3 p

A cap


We tie the last two rows of the hat with fancy white yarn, st-mi, b/n.

Beard.

We knit 20 chain stitches, then we will continue knitting in both directions.


The beard is ready.

Nose.

For the nose, we knit 6 single stitches into a magic ring, join them into a ring and then knit two rows of single stitches.


On the top of the head we sew a hat with hidden stitches, and we sew the head to the collar of the caftan, and we sew the arms on the sides using a tapestry needle in sewing. We sew the lapel of the caftan in the center of the caftan.


Sew the beard to the head, somewhere in the middle.


Above the beard in the center of the face we sew Santa Claus a red nose.


Glue the black half-beads onto Moment glue - these will be the eyes.


Crocheted Santa Claus is ready to come to your home and congratulate everyone on the upcoming holidays.

Description Santa Claus and Snow Maiden.

This is one of my first descriptions, so if anything is unclear, ask, I will answer everyone




Ded Moroz and Snegurochka


Knitting with 3.5 mm needles.


Blue color for the Snow Maiden, red for the grandfather, flesh-colored, and white fluffy yarn for trim and beard.


Torso and head


Cast on 60 stitches with blue or red. Distribute on 3 knitting needles, knit in a circle. stitch approximately 14 cm. Change the color to flesh and continue knitting for another 7 cm, then decrease:


(8 knits, 1 dec.) x 6 times = 54


(7 knits, 1 dec.) x 6 times = 48


(6 knits, 1 dec.) x 6 times = 42


(5 knits, 1 dec.) x 6 times = 36


(4 knits, 1 dec.) x 6 times = 30


(3 knits, 1 dec.) x 6 times = 24


(2 knits, 1 dec.) x 6 times = 18


Pull the remaining loops onto a thread.


Cast on 60 sts along the bottom edge with fluffy white yarn, purl 5 rows. loops (for more shaggyness).


Stuff the part, where the colors transition, pull the thread through the loops and tighten, forming a head.


Front placket on a fur coat


Cast on 5 stitches with fluffy white yarn, knit with edge stitches k1. row, purl 1 row, to the desired length.


Donyshko


Crochet with blue yarn for the Snow Maiden and red yarn for Grandfather.


1) 2VP, 6СБН


2) 6 ave.=12


3) (1СБН, etc.)x6=18


4) (2СБН, etc.)x6=24


5) (3СБН, etc.)x6=30


6) (4СБН, etc.)x6=36


7) (5СБН, etc.)x6=42


8) (6СБН, etc.)x6=48


9) (7СБН, etc.)x6=54


10) (8СБН, etc.)x6=60


Cut a circle the size of the bottom out of cardboard or plastic and place it down, sewing the bottom to the bottom of the body.


Hands(2 pcs.)


Cast on 21 stitches, distribute over 3 needles, knit in the round with 8 cm knit stitches, then change the yarn to white fluffy yarn, knit: 1 row with knit stitches, 3 rows with purl stitches. loops, then change the color to the original and knit a mitten: 9 rows of faces. loops, then a series of decreases: 1 person. p., 1ub. Pull the remaining 14 stitches onto a thread.


Collar


Using white fluffy yarn, cast on 35 stitches, knit. stitch 15 rows, with edge loops.


A cap


Cast on 60 stitches using shaggy white yarn, distribute onto 3 needles, knit in the round. loops 5-6 rows. Change the color to red or blue and knit stitches, 5 cm for the Snow Maiden and 7 cm for the grandfather. Next, decrease as on the head.


You can attach a pompom.


Eyes


Knit with iris or other thin threads.


Iris


Blue for Snow Maiden and brown for grandfather


1) 2VP, 6 RLS


2) 6 ave = 12


Pupil


2VP, 6 RLS


Sew the pupil to the iris.


Santa Claus mustache


Cast on 15 stitches with white fluffy yarn. Knit 4 rows of faces in satin stitch.


Pull the mustache strip in the middle and from the sides to create pointed edges.



Beard


Cast on 25 stitches with white fluffy yarn. Knit faces. In satin stitch, decrease 1 stitch at the beginning and end of the front rows.


When 13 stitches remain, then decrease through the front row (i.e. after 3 rows).


When 7 stitches remain, decrease each knit row. Decrease until 1 stitch remains.


Grandfather's eyebrows


Fold the shaggy yarn several times and sew it over the eyes.


Grandfather's nose


Knit with pink yarn according to the pattern.



Gather along the edge with a thread, put filler inside, and sew the resulting ball into place.

The New Year always gives us hope for the best, gives us many gifts and pleasant emotions. During this period, we can easily feel like heroes of a fairy tale. We all remember our childhood, perceiving what is happening around us through the eyes of a child. We decorate our house, create a fairy tale, be sure to put up a Christmas tree and, of course, Santa Claus))) I bring to your attention my Grandfather))) I used “Krokha” (Trinity) yarn, hook No. 3, grass (white) for the beard.


  • interesting selection for the site!!!
  • Children's hats, without adult models

Description of Santa Claus

Torso (coat)

We cast on 60 loops with red thread and close it into a ring.
2 p rise, 59 dc
So we knit 15 rows
Row 16 - 2 p.p., 14 dc, 2 dec, 24 dc, 2 dec, 13 dc
Row 17 - 2 p.p., 14 dc, 1 dec, 24 dc, 1 dec, 13 dc
Row 18 – 2 p.p., behind the back wall (5 sc, dec) to the end of the row
Row 19 - sbn

We knit the bottom with two rows of white thread:
1-2 row - 5 hdc, inc (so until the end)

I made the bottom with different threads, cheap ones. You can use some leftovers. Preferably dense.
2 vp, in 1 p. 6 sbn
Ave, 1 sc)
(inc, 1sc) 6 times (12)
(inc, 2 sc) 6 times (18)
(inc, 3 sc) 6 times (24)
(inc, 4 sc) 6 times (30)
(inc, 5 sc) 6 times (36)
(inc, 6 sc) 6 times (42)
(ex, 7 sc) 6 times (48)
(inc, 8 sc) 6 times (54)
The diameter may be smaller or larger depending on the yarn.

Hands

20 ch. in the ring
Row 1 - 1 st, 3 sc, 1 hdc, 10 dc, 1 hdc, 4 sc
2nd row - 1 p.p., 3 sc, 1 hdc, 10 dc, 1 hdc, 4 sc
3-7 r. (5 rows) - 2 pp, 19 dc
Row 8 - 2 p.p., behind the back wall 19 dc
Row 9 - 1 pp, 2 sc, dec, (3 sc, dec) * 3 times (16 stitches in total)
Row 10 - 1 st, behind two walls 15 sc
11th row - 1 st, 4 sc, 3 air. loops, skip 3 loops, 8 sc
12-16 row (5 rows) - 1 st, 15 sc
Row 17 - 1 st, dec, 4 sc, 2 dec, 4 sc, dec (total 12)
Row 18 - 1 st, 4 sc, dec, 4 sc (10)
Row 19 - 4ub
finger where 1 stitch was missed, 8 sc (total 9)
1-4 r. - 1 p.p., 8 sbn
5th row - 4 kills
In row 7 behind the front wall with white thread
Row 1 - 2 p.p., 19 hdc.
Row 2 - (2 sc, inc) to the end.
The second hand is similar, only the finger is on the other side
We insert the wire into the hand and stuff it (a little into the mitten)

White stripe on coat
6 v.p.
1st row - in the 4th loop and to the end of the hdc (you get 5 sts)
Row 2 - 5 hdc
Rows 3-17 - 5 dc

Assembling the body.

I had cover pages from a sketchbook, folded 2 sheets in half, inserted them and trimmed off the excess. We fill it so that it is denser at the bottom and tapers towards the top. Then I sewed on the arms and knitted the collar. If the collar starts to wave, just skip the increase, but I didn’t have to. The collar is awkward to knit because of the paper, but you can see how it turns out. I sewed the white stripe on the first one, but glued it on this one.

Collar
1st row - all increases dc
2-4 row - dc (on the 3rd row, change the thread to white)

We knit the head like a regular ball.

1 r - 2 v.p. In the 1st paragraph 6 sc
2 r - (pr) 6 times (12)
3 r - (inc, sc) 6 times (18)
4 r - (inc, 2 sbn) 6 times (24)
5 r - (inc, 3 sc) 6 times (30)
6 r - (inc, 4 sbn) 6 times (36)
7 r - (inc, 5 sc) 6 times (42)
8 r - (inc, 6 sc) 6 times (48)
9-16 r - 48 sc
17 r - (dec, 6 sc) 6 times (42)
18 r - (dec, 5 sc) 6 times (36)
19 r - (dec, 4 sc) 6 times (30)
20 r - (dec, 3 sc) 6 times (24)
21 r - (dec, 2 sc) 6 times (18)
22 r - (dec, sc) 6 times (12)
23 r - (dec) 6 times (6)

After the 8th row, measure the diameter, mine is almost 7.5 cm. If less, knit another row with an increase (inc, 7sc) (54). Then there will be another plus 1 row of sc. My yarn is just thick, that’s enough for me, if it’s thin, then I’ll probably have to add more.

A bag with presents

We knit the bottom like a head up to the 9th row.
Then behind the back wall with 2 pp. 8 rows dc. And the last row knit all the increases dc
We stuff the bag and tie it with a ribbon


Good afternoon friends!

Today, I have a new New Year's character - Santa Claus, we will crochet him. And in the last master class I showed...

Almost every person has a New Year tree in their home; it can be either artificial or real. In any case, it is customary to place Father Frost and the Snow Maiden under the Christmas tree. It can be crocheted from yarn to make a bright and soft toy. You can knit Santa Claus as a gift for friends or family. For knitting we use grass yarn, which is great for knitting fur coats and beards.

Santa Claus - materials for knitting:

  1. Red yarn (wool mixture) – 50g.
  2. Cream yarn (wool blend) – 15 g.
  3. White yarn (wool mixture) – 1 g.
  4. White yarn “Grass” – 10g.
  5. Foam rubber.
  6. Black beads – 2 pcs.
  7. Scissors.
  8. Glue gun.

We knit the body of Santa Claus

We start knitting the toy from the body; you will need red yarn and “grass”. Connect a chain of 3 loops into a ring.

1st row: knit with an increase in each loop.


4-5 row: tie these rows in a circle without adding loops.

Row 6: Increase through 1 stitch.

Rows 7-10: knit these rows in a circle without adding loops.

11th row: increase through 2 loops.


Rows 12-15: knit these rows in a circle without adding loops.

Row 16: Increase through 3 stitches.

Rows 17-19: knit these rows in a circle without adding loops. Fill the torso with foam rubber.


Now you need to knit from the inside. Tie 2 rows in a circle, then cut through 2 loops in 2 rows. On the next row, cut through 1 stitch, and then in two rows, cut in each stitch. Cut the thread. The body is ready!


Use white “Grass” yarn to tie the body in one row, as in the photo below. You will get Santa Claus's robe.


We knit the head of Santa Claus

The head is knitted from cream yarn. Connect a chain of 3 loops into a ring.

1-2 row: knit with an increase in each loop.

3rd row: increase through 1 loop.

4th row: tie this row in a circle without adding loops.

Rows 6-9: knit these rows in a circle without adding loops.


Row 10: Cut through 3 stitches.

Row 11: knit without adding. Fill with foam.

Row 12: Cut through 2 stitches.

Row 13: knit without adding

Row 14: Shorten in each stitch. Cut the thread.


Hat for Santa Claus

The hat is first knitted from red yarn. Connect a chain of 3 loops into a ring.

Row 1-2: Increase in each stitch.

3rd row: increase through 1 loop.


5th row: increase through 1 loop.

Row 6: tie without adding loops.

Row 7-8: tie “grass” yarn with white yarn. Cut the thread.


We knit the hands of Santa Claus

Hands are knitted from red yarn. Connect a chain of 3 loops into a ring.

Row 1: Increase in each stitch.

Row 2: tie without adding loops.

3rd row: knit a chain of 5 loops. Fold in half and knit in the round. This will be a finger.


4th row: tie without adding loops.

Row 5: knit “grass” yarn with white yarn.

Knit 6 rows of red yarn in the round. Fill with foam rubber. In the last two rows, cut off stitches. Knit the other hand in the same way.


Glue a cap filled with foam rubber to your head.


Knit the beard in 2-3 rows of white “grass” yarn.


Glue the head and arms to the body.


Gift bag

The bag is knitted from red yarn, and the strap from white yarn.

Cast on a chain of 5 loops and tie along the oval. Make an increase in each stitch. Then knit 9 rows. Fill with foam rubber.


Knit the strap from white yarn using a chain of 70 loops. Tie the bag and make a bow.


Glue on the eyes - black beads and make a red nose from yarn. Sew the bag to your hand.

Santa Claus is ready for the New Year!

Santa Claus - crochet, knitting pattern

By the way! If you have already started preparing for the New Year, look in the form of Santa Claus and Snow Maiden

How to decorate champagne for the New Year

Also, you can do it yourself

My friends, Happy New Year and have a nice time!

Friends, if you found my master class useful, share it with your friends!

Such cute tea warmers in the form of Father Frost and Snow Maiden It’s absolutely easy to create with your own hands, just imagine how they will decorate the holiday table. Our magazine offers you a description and a free knitting pattern for these New Year's symbols. By the way, this can be a wonderful gift for a friend or loved one...

So, to make Santa Claus we will need:

Soufflé-type yarn in red, white and pink, two beads for the eyes, a lot of padding polyester, crochet hook No. 3 and knitting needles No. 3.

Knitting types:

Description of work

Body and head: cast on 20 stitches with pink yarn and knit in stockinette stitch. At the same time, in the 3rd and 5th rows we evenly add 10 loops, then from the 6th to the 22nd row we knit without adding. Next, we knit 32 rows with red yarn in stockinette stitch, then eight rows with white yarn and again with red yarn for 40 rows.

Assembly:

Beard: using white yarn we cast on a chain of 15 chain stitches, perform the first row in st. b/n, second and all subsequent even rows - elongated loops. At the same time, in every second row we decrease 1 loop. We knit until one loop remains, after which we sew on the beard.

Nose: crochet three air loops with a pink thread, connect them into a ring and knit the first row 7 tbsp. b/n. 2nd and 3rd row: 14 tbsp. b/n.4th r: 11 tbsp. b/n. The nose is ready, we stuff the part with padding polyester and sew it on, after which we sew on the beady eyes.

Santa Claus hat: cast on 38 stitches on knitting needles with white yarn. We perform 6 rows in garter stitch, then, using red yarn, we perform 20 rows in stockinette stitch, after which we bind off the loops and sew a seam. Tighten the top of the cap. Sew a pompom onto the top of the head.

Father Frost ready, it's time to start playing with the Snow Maiden. What would it be like without her?

For the manufacture of Snow Maidens we will need: soufflé-type yarn in blue, pink and white, a little padding polyester, beads for the eyes, hook number 3 and knitting needles number 3.

Knitting types:

Front stitch: in the front rows we perform all the loops in RS, in the purl rows we perform all the loops in IP.

Garter stitch: purl and knit rows are done in LP.

Description of work

Body and head: cast on 20 stitches with pink yarn and knit in stockinette stitch. At the same time, in the 3rd and 5th rows we evenly add 10 loops, then from the 6th to the 22nd row we knit without adding. Next, we knit 32 rows with blue yarn in stockinette stitch, after which eight rows with white yarn and again with blue yarn for 40 rows.

Assembly: we make a seam, fill the head with padding polyester, sew the bottom edge to the neck, and tighten it.

Nose: use a pink thread to pick up three air loops, connect them into a ring and perform the first row as follows: 6 tbsp. b/n.

2nd and 3rd rows: 9 sc.

4th row: 6 tbsp. b/n. Then we fill the part with padding polyester. Sew it on and embroider the mouth with red thread. Sew on beady eyes.

Hat: cast on 38 stitches with white yarn, work in garter stitch for six rows, then use blue thread for 12 rows in stockinette stitch. At the same time, we evenly decrease 6 loops in each front row, until. Until there are eight stitches left on the needles. Close the loops and sew the seam. Pull the top of the cap together and sew a pompom onto the top of the head. We make two braids from white yarn and sew them to the hat.

Scarf: cast on 6 loops with white yarn and knit 100-105 rows, then close the loops and tie the scarf on the Snow Maiden.

Here you go, New Year's couple ready.

Related publications