Schemes of voluminous paper snowflakes and manufacturing instructions. DIY voluminous paper snowflakes step by step instructions Photo of voluminous paper snowflakes

Hello, dear blog readers. Are you upset that winter is in no hurry to arrive in your area? You can create it with your own hands. If you know how to make regular and voluminous snowflakes from paper, then you will cope with the task. Feel like a weather smith!

The simplest way to create paper snowflakes with your own hands is 3D decoration. Children can handle this too, don’t be afraid to entrust this task to them.

What we will need:

• White paper (other colors are fine);
• Stationery stapler;
• Scissors;
• The pencil is simple;
• Ruler;
• Glue (any).

Step-by-step instruction:

If you make crafts of different sizes, attaching them to threads, you will get beautiful garlands. A few decorations can help simulate snowfall during your New Year's party.

Simpler option

If fine motor skills of your fingers coupled with artistic abilities do not allow you to create masterpieces, you can create simple snowflakes from paper with your own hands in the shape of an accordion.

1. Take a leaf and cut it into strips. The width is the same, should be 7-15 cm;
2. Fold the strips in half and draw the outline of the pattern. Using manicure scissors (others will work too) we cut through the ornament;
3. If the material is not dense, fold in two parts and cut together;
4. We fold each part like an accordion. The dimensions of all workpiece segments must be equal. If there are differences, it will not be possible to glue both parts;
5. Lubricate the edges of the accordions with glue, fasten them, and dry them. We take the craft and carefully straighten it.

Christmas trees-needles

Is the prickly frost knocking on all the windows? Take some of his spirit! Before you make a paper snowflake with real spines, stock up on:

• Needle;
• Sheets of paper;
• Threads;
• Compass;
• Pencil;
• Red (yellow) cloth;
• With a ruler.

The creation principle is as follows:

1. Draw 4 circles. The diameter is the same - 5 cm. For large crafts, increase to 10 cm;
2. Let's cut them out. Using a pencil and ruler, divide everything into eight segments. We cut along the formed lines and cut circles from the edges to the middle;
3. The result is petals, the ends of which are carefully bent towards the center, then glued together. To get the perfect shape for the petals, help yourself with a pencil;
4. Create three identical flowers. It's time to fix the blanks together. Glue or thread with a needle will help (try sewing the parts together);
5. Cut a circle out of fabric and fasten it in the center of the craft. Decorate with sequins, rhinestones, sparkles... Twist, twist

Quilling

Is the blizzard spinning in circles, drawing smooth patterns on the ground and in the air? We master artistic twisting - quilling.

We need:

• Paper strips (3 mm);
• Toothpick (awl);
• Glue;
• Tweezers;
• Scissors.

Making a snowflake from a photo

1. Attach the end of the awl to the edge of the strip;
2. We wind a strip on it;
3. Glue the end of the tape to the resulting coil. Carefully remove the roll from the awl;
4. We make a second coil, but on one side we squeeze it with two fingers. We make 6 pieces;
5. We glue the resulting 6 rolls to the first one;
6. We wind up 6 rolls, squeezing them on both sides with our fingers. The rolls should look like eyes;
7. Glue them between the petals of the craft;
8. Bend and cut the following ribbons (3 pieces). You now have 6 stripes;
9. We roll 6 new rolls;
10. At each of their tips we add a detail similar to an eye;
11. We roll up six more rolls from long strips, now larger in size than all the previous ones. Do not tighten the paper, these should be looser;
12. We glue them between small coils, onto the parts of the resulting “drop”;
13. We roll up two triples of new “coils”. The size should be large, we bend them so that the shape is square;
14. We glue them to large rolls at the top;
15. We wrap a long ribbon around a pencil, glue its end and remove it from the pencil;
16. We attach it to one of the tops of the craft. We thread a fabric ribbon or thread into this ring.

From tapes

This option is less labor-intensive than quilling, but you will need paper strips, as well as glue and scissors. To create a fragile paper snowflake with your own hands, the width of the strip should be 4-5 mm.

1. We cut the sheet so that the lengths of the ribbons are different: for half a snowflake, one strip should be ¼ meter long, two 21 cm long and the same 19 cm long;
2. Lubricate all ends of the blanks with glue and fasten them together. Dry them and create a leaf from them. Check that everything sticks together. If the connection is not strong, add thread;
3. We repeat the manipulation, creating 8 more leaves. To obtain volume, it is better to glue a dozen of these leaves together. Allow all parts to dry;
4. Cut out a centimeter strip from cardboard. We glue it into a ring. We glue all the blanks obtained earlier to this ring. If it is not too strong, you can first glue the leaves together. All that remains is to fix them on a round ring.

There is a more complicated option. For this craft you will need paper clips, 6 quarter meter long ribbons and glue. We proceed like this:

• We intertwine the ribbons together so that we get a square in the middle. We will fix all these strips with paper clips or glue;
• We now connect the closely spaced stripes. First, their tips need to be greased with glue, then carefully fastened together. You should now have a leaf;
• We carry out the same manipulations with three parts of the workpiece. Do the second half in the same way. All that remains is to fold both parts so that the craft looks like a flower. You can wait for the glue to dry, remove the paper clips and hang it on the Christmas tree.

Snowflake in the shape of a ball

We proceed like this:

1. Cut out 12 circles from colored paper using a compass. They should have the same diameter;
2. We bend all the circles in half. A stack should form. Alternate colors if the material is of different colors;
3. Keep the resulting stack under pressure for a quarter of an hour. This will make their fold line more expressive and allow them to be fixed correctly;
4. We straighten the workpiece very carefully and connect the 12 parts together with a stapler. All staples must be on the fold line;
5. All that remains is to create the form. We straighten the circles and glue them together. We connect so that all the halves of the circle are joined to the adjacent part of the craft on one side with the top, and on the opposite side with the bottom.

Origami

The most difficult option, but if you master it, you can delight people with masterpieces. This requires good coordination without unnecessary details. All you need is paper and finger dexterity plus concentration.

Take a sheet (square). Fold diagonally. Now in half and in half again. We have a triangle. We draw a line on it and make a cut. We unfold the sheet so that a square is formed again. We bend its corners, resulting in the center, inward. We connect the corner with glue to the corner. They shouldn't turn around. We turn the craft over, bend the large corners towards the center and glue them together for strength. We fold what we have in half. We repeat the operation five times in a row. We glue all the parts with the corners facing each other. All parts must be located in the same direction.

To master origami, start with simpler options: animals, flowers, buildings, simple sculptures.

Karigami

The option is a little more complicated and requires serious skills. Needs long training. Here you need to fold the sheet and cut out the pattern very precisely. Before creating this masterpiece, you first need to draw a pattern and then start cutting it out with nail scissors. This is an option for beginners, because it allows you to cut out even the most complex pattern correctly. Once you have everything cut out, all that remains is to bend some of the parts and the karigami is ready.

There is another, much more complex version of origami. It's called modular origami, but the sculptures are simply unrealistic. To create such a masterpiece, you need to make a large number of small paper parts. The hardest part is connecting them in the right order. Modular origami is most similar to a construction set, but it is created with your own hands and not from plastic. The disadvantage of this method is that any (imperceptible to the eye) mistake when folding or gluing will spoil the impression and perception of your snowflake. The work is jewelry, but the Japanese don’t recognize anything else. It is better to start karigami or modular origami after you have mastered the tape technique, quilling and 3D snowflakes. Additionally, it is useful to practice crocheting and modeling.

Creating three-dimensional snowflakes is not that difficult. There are options available even to children. You will make the remaining versions without the help of children. It takes perseverance, patience and time. If you allow such luxury, you can decorate your home or office with luxurious garlands and fragile crafts. Go ahead, experiment and visit our blog often for new ideas!

With the onset of winter and the approach of the New Year, which envelops us in its magic, buildings and streets are filled with snowflakes, both real and artificial. Applied arts that allow you to create amazingly beautiful snowflakes are a great way to spend time on the eve of the New Year holidays.

Snowflake decorations are most often made from paper. Paper is a plastic material that has the ability to take on different shapes. Snowflakes are made by cutting out paper blanks, embossing and folding. These techniques can be combined or used separately.

Not so long ago, paper snowflakes had almost no differences. A few years ago, these decorations were cut mainly from white napkins. The configuration turned out to be identical, only the design was different.

Do you need homemade decorations?

Today, techniques for making snowflakes have become more diverse. Various creative techniques make it possible to make New Year's snowflakes that are similar in appearance, but have individual differences.

Of greatest interest are snowflakes made from paper blanks with a three-dimensional configuration. Making such beauty is not much more difficult than flat snowflakes.

There are many options for decorating rooms for the winter holidays. For this purpose, you can use purchased decorative items and make homemade decorations. Lately, many have opted for New Year's handmade items.

It takes time to create New Year's accessories, but the result is worth it. Thanks to homemade New Year's decorations and, first of all, snowflakes, you can decorate your home for the holidays quickly and originally.

The main task is to master the techniques for making three-dimensional snowflakes, and this article will introduce you to master classes and popular snowflake templates that you can draw or print and cut out.

After spending a little time, you will get acquainted with the most popular schemes for creating homemade snowflakes of various shapes.

Option No. 1 – decoration with twists

This option for creating a homemade 3-D paper snowflake, the peculiarity of which is its three-dimensional configuration, is worth trying for those who want to decorate the room with large decorative elements. The design of such snowflakes can include several colors at once. Of particular interest are the transitions of tones in a circle.

Make six square pieces of paper with the same dimensions.

Important! The radius of the decoration will coincide with the diagonal of the square-shaped paper part; Taking this point into account, first decide what format of snowflakes you want.

In addition to paper, you will need scissors, a simple pencil and glue. You will need a ruler for marking, and a stapler to fasten the parts.

Let's look at the scheme for making a three-dimensional New Year's snowflake in more detail:

If you do not fully understand the scheme for making a snowflake yourself, watch the video: the master class will help you create a paper decoration:

Option No. 2 – template decorations

Involve children in arts and crafts. Jointly creating New Year's accessories using templates is a great opportunity to chat with children and help them learn new creative techniques that will certainly be interesting to them. Together with your children, make homemade paper decor in the form of three-dimensional snowflakes.

To make a 3D decoration, you just need to fold the pieces in a circle and then glue one on top of the other; In this way, you will create a three-dimensional snowflake from flat elements.

Those who are not going to make a three-dimensional decoration by gluing together several identical pieces should use the “accordion” technique - it is quite simple.

Fold the paper sheet like an accordion and fold it in half, then make markings.

The paper turned out to be too thick, and you can’t immediately cut out a solid product? It’s easy to solve the problem - draw markings on one side and the other of the accordion: this technique will save you from the need to fold a sheet of paper in half. In addition, using this technique, you can create details of halves and quarters of future snowflakes. The blanks are laid out and then glued together.

The photo shows an easy-to-create jewelry option, but you can make more unusual designs. Attach loops to the snowflakes or combine them, thereby making a garland, and decorate the room for the New Year holidays.

To better understand the accordion technique, watch the video demonstrating how you can make a voluminous paper snowflake step by step:

Option number 3 – snowflake star made of paper strips

Let's look at another simple and yet interesting technique for creating paper snowflakes with a three-dimensional shape with a step-by-step technique, perfect for beginners. This technique in most cases involves the use of paper, which is used in the quilling technique. Such paper can be purchased at stores offering handicraft supplies.

If you can’t find special paper, plain paper sheets will do. In addition to paper, prepare brushes, glue and clothespins.

Step-by-step instructions for making a star snowflake:

Option number 4 – flower snowflake

Snowflake decorations, reminiscent of flowers in appearance, will add tenderness to the festive decoration of the room and help create a fairy-tale atmosphere.

Let's start making a flower snowflake. To make such a decoration, you will need a landscape sheet, a pencil, an eraser, scissors and stationery glue.

Use these instructions to make a voluminous flower snowflake for the New Year:

You can look at the technique of making a flower snowflake in more detail in this video:

Option No. 5 – decoration using quilling technique

New Year's quilling decorations are very popular: they look much more attractive than standard decorative elements. Quilling snowflakes decorate windows, Christmas trees, walls, and you can also use them to decorate a holiday table. Often such jewelry is made in several colors and decorated with sparkles to make them more vibrant.

First, cut the strips: their number depends on the configuration of the future decoration. The length of one strip is 15-25 cm and the width is approximately 2 cm.

The most important part of the job is to curl the strips correctly. To prevent the strips from losing the required shape, coat them with glue. It is recommended to secure the round parts with a clothespin until they dry.

After finishing preparing the parts, assemble them into a snowflake. Glue the elements to each other. In the middle of the decoration, place a circle consisting of several layers - one folded strip. To make your work more convenient, use a thread spool.

The final step is decorating and fixing the resulting snowflake. You can start decorating only after the parts have dried and adhered well.

Video with a master class on making homemade quilling snowflakes:

Option number 6 – beautiful snowflake with rhinestones

Let's start creating a snowflake.

Make square-shaped paper blanks of identical sizes - and form them into a cone, one corner should stick out from the back side. Fix the parts with glue at the base, thanks to this they will securely hold the structure.

Fix all the details in a circle and repeat these manipulations, then you will get a decoration consisting of several layers.

Decorate the snowflake with beads and rhinestones to make it brighter.

Option No. 7 - modular snowflake

We bring to your attention another scheme for making paper New Year's snowflakes, the peculiarity of which is their three-dimensional form: decorations are created from several parts in the origami style.
Make rectangular paper blanks - they should have identical dimensions.

The technique for creating blanks will become more clear if you look at the photo:

Place the triangles one on top of the other, securing with glue. It is advisable to first decide on the color and configuration of future snowflakes. First try connecting the parts without glue.

By fixing the triangular blanks, you will get an origami-style snowflake decoration from the modules.

In this article, we looked at the most popular techniques for making New Year's snowflakes from the most common material - paper, the peculiarity of which is their three-dimensional configuration. Paper makes it possible to bring many original ideas to life; thanks to even very simple stencils you will get fabulous holiday snowflakes.

Another video instruction for creating a homemade paper snowflake using an original technique:

The New Year makes you believe in miracles. Create wonderful New Year's decorations with your own hands. Beautiful paper snowflakes will allow you to decorate your home in a New Year's way. Decorative elements that keep the warmth of your hands will make the atmosphere not only festive, but also cozy.

Be inspired by the beauty of New Year's accessories, create mini-masterpieces and delight others with designer decorations.

To create a festive atmosphere, each of us tries to decorate our home and workplace for the New Year. Snowflakes are perhaps the most common decoration. They can be cut out of paper, napkins or even newspaper, and have a variety of shapes and colors. They are glued to windows, walls, and hung from the ceiling by threads. You can make a stunningly beautiful New Year's garland from several snowflakes fastened together.

If you want to make a more spectacular decoration for your home or office, you can make an openwork voluminous snowflake with your own hands.

Required tools and materials

In order to make a three-dimensional snowflake, we will need:

Manufacturing stages

Preparatory stage. We take sheets of paper and make even squares out of them. For each snowflake you need 6 such paper squares with a side length of 10 to 20 cm (depending on what kind of snowflakes you want to cut out - large or small). By the way, for small snowflakes you can use thin paper. But thin paper is not suitable for large snowflakes - the products will not hold their shape.

Step one. Take one paper square and fold it in half diagonally. You should have a triangle in your hands. We do the same with the remaining five blanks.

Step two. We arm ourselves with a simple pencil and a ruler and begin to draw lines on the triangles. We draw lines parallel to the edges of the triangle, placing them at equal distances from each other. Next, we make cuts along the lines with scissors so that about 3 mm remains to the center of the triangle.

Step three. Actually, half of the work is ready. There is no need to cut anything else, we will glue it. We unfold the triangle (that is, give it its original square shape) and roll up its central part into a tube, connecting the edges of the cut. We fix the tube along the edge with tape or glue. From experience, I must say that tape holds the edges more tightly.

Step four. After the edges of the tube are securely fixed, we turn the square over so that the glued part is at the bottom, and on the wrong side we bring the edges of the next cut together, making another tube. Again, fix the edges, lubricating them with glue, or gluing a strip of tape.

Similarly, we glue all the cuts on the square. That's it, the first ray of our future three-dimensional snowflake is ready!

We repeat all the manipulations, starting from step three, with the remaining squares and make 5 more rays.

Step five. We connect the tops of the rays with a stapler, 3 pieces each. These will be the top and bottom of the snowflake.

Step six. Use a stapler to carefully fasten the bottom and top of the snowflake.

Step seven. In order for the product to better hold its shape, we fix the adjacent edges of the snowflake with a stapler.

We took white paper, and the snowflake turned out to be the traditional white color.

But you can make a multi-colored snowflake, each ray of which will have its own shade.

An already finished snowflake can be decorated with sparkles, sequins, finely chopped foil, etc.

And finally, I suggest you watch several videos on making three-dimensional snowflakes, where the whole process is clearly shown.

The cold weather has arrived, snow has fallen, and a festive mood is in the air. Store shelves are filled with tangerines, Christmas tree decorations and tinsel; soon Christmas trees will go on sale and homes will be filled with the tangerine-pine festive aroma familiar from childhood. Until this happens, it’s time to think about decorating your home; in the last article we told and suggested, and now we will tell and show how to make a three-dimensional snowflake.

It seems that voluminous paper snowflakes are a simple decoration, but they will create a festive atmosphere in the house. That is why you should set aside a day of free time, stock up on paper, arm yourself with scissors, glue and imagination to make large voluminous snowflakes. And the videos and step-by-step instructions that we will offer will help you make voluminous snowflakes.

We hope you enjoy the proposed DIY voluminous paper snowflakes, and the step-by-step instructions will help you make them.

Well, let's move from words to action and start looking at voluminous snowflakes step by step with photographs and videos.

Volumetric snowflakes 3D

To make them you will need:

1. Paper (color of your choice);
2. Scissors;
3. Glue;
4. Stapler;
5. Ruler;
6. Pencil.

How to do:

1. From paper we make 6 identical squares of the size you need. A4 sheet is perfect for this.
2. Fold the workpiece diagonally twice.
   
3. On each resulting triangle we draw lines at right angles. The gap between the lines should be 1 centimeter.
   
4. Next, we cut strictly along the drawn lines, do not cut to the edge, otherwise nothing will work.
5. Unfold and start gluing the corners. We connect the first pair in one direction, the second pair in the opposite direction, and so we alternate until the end.
   
   
6. We put the finished part aside and do the same with the other squares.
   
7. When all the parts of the snowflake are ready, carefully connect them together with a stapler. The snowflake is ready!

Volume snowflakes made of 3D paper, see photos and videos below on how to make them.

Volumetric snowflakes made of 3D paper (2nd option)

The method for making this snowflake is similar to the previous one, but the result is different. For its manufacture, the same materials are required as in the previous version.

How to do:

1. We take a sheet of A4, draw 6 squares, the side of each is 9.5 centimeters. If desired, the squares can be made larger.
2. Cut out the squares.
   
3. We fold each square diagonally, using a ruler and pencil we draw at a right angle to the bend of the line. The distance between them is 1 centimeter.
   
4. Next, we make cuts along the drawn lines, but not reaching the bend.
   
5. We unfold the workpiece.
   
6. Now we begin to make the first part of the snowflake. Take the 2 bottom strips and glue their edges together. Next, turn the workpiece over and do the same with the next pair of strips. So until the end. Do this for all the remaining squares.
   
   
   
7. When all the poles of blanks are ready, we connect them to form one snowflake.
   
   

Snowflake made of stripes

1. Paper;
2. Scissors;
3. Glue.

How to do:

Volumetric snowflake made of stripes, second option

For manufacturing you will need the same as in the previous case.

How to do:

Volumetric snowflakes flowers

For production you will need:

1. Glue;
2. Scissors;
3. Printed stencils (attached to instructions below).

How to do:

1. First of all, we save the stencils and print them on a color printer. For one snowflake you will need 20 figures for the inner row of the snowflake and 20 for the outer one. The figures for the inner row should be slightly smaller.
2. We cut out the shapes, fold them in half and use glue to glue the halves together, 4 pieces at a time.
3. As a result, these are the spare parts you get.
4. Cut out a small circle from cardboard, about 5 centimeters in diameter. We glue large parts in a circle for the outer circle. Please note that the petals should not overlap each other.
5. Next, between the petals of the outer circle we glue the petals of the inner circle.
6. Now we need to cover the void on the circle; for this we can use paper strips folded like an accordion. The result is such beauty.

If desired, the proposed stencils can be printed in black and white and colored with pencils as desired.

Fans of voluminous 3D snowflakes can make as many as 7 options for New Year’s decor using this MK! In addition, once you understand the principle of creating a snowflake, you can create your own design.

The difficulty of the work is average, since younger students will not be able to carefully cut out thick layers of paper.

For one 3D snowflake you will need:

• 1 sheet of A4 size;
• ruler with pencil;
• sharp scissors (dull scissors will leave nicks on the paper, making the work look sloppy);
• needle and thread to match the paper;
• a large embroidery needle (with a rounded tip) or a ballpoint pen that has stopped writing;
• a printer for printing the template (but the template can be redrawn by hand);
• glue stick;
• scotch;
• a stack of newspapers or paper (place under the sheet).

Click on the picture to download the template file :)

How to make 3D snowflakes from paper using a template:

1. We prepare everything necessary. Take sheet A4.
2. On both wide sides from left to right we place marks every 3 cm.
3. Place the sheet on a stack of paper for softness. Use an embroidery needle to draw lines between the marks. The pressure should be strong so that the strip remains, but not excessive so that the paper does not tear.
4. Using the drawn lines, we fold the sheet into an accordion.

   

5. We make 2 transverse lines on the accordion, dividing it into 3 equal parts 7 cm long.
6. Cut off one part of the accordion.
7. In the middle of the second line we sew one stitch with matching threads. Tighten well and make 2-3 knots. Trim the ends of the thread. We make a fold along this line and carefully iron it - first in one direction, then in the other direction.
8. We place the template on the accordion and trace it with a well-sharpened pencil. A straight vertical line of the template should run along the stitch, and the edge of the paper should run along the bottom of the template. On the second side we place the template in a mirror manner. We also outline the template on the third cut part, if we want to give the 3D snowflake more fluffiness, increasing the number of rays by a third.

   

9. Using sharp scissors, cut along the marked lines.
10. We open the rays of the 3D snowflake and attach a small piece of tape to the edge of the paper on one side.
11. We combine snowflakes from the opposite edge with the ray and stick them on the same tape. It turned out to be a semicircle.
12. Now we glue the cut part of the accordion to the remaining open middle. Apply glue to no more than a centimeter from the center to the outer edge, and glue the rest on adjacent sides with tape.

    

13. We continue to glue adjacent sides.
14. The width of the tape should match the width of the template section along the bottom edge.
15. This is what an almost finished 3D snowflake looks like.
16. All that remains is to level it, opening the rays to the same width.

    

Shared master class

Anastasia Kononenko